SheetCAM: Fully licensed CAM software that creates G-code cut files.
ORS 279A.120 STATES: In determining the lowest responsible. This post processor provides SheetCam with a process to convert the imported data into a format that can work with the Pritec ACROS. loaded with Windows XP and includes a license for Mach 3 and SheetCam. To improve communication between SheetCam and the Pritec ACROS Mach3 controller, a Post Processor has been written.
You will notice in the below example that the cut path 5mm before and after the corner is highlighted in a different colour, this is the rule being applied. I have license in my name for control software and have the Basic design software. Make sure the rule name is selected in the drop-down list under path rules.Ĭlick OK. In this case, below we’ve added another rule to slow down the machine to 80% 5mm before and after a corner tighter than 90 degrees.Ĭlick OK. The rule will display in the list.Ĭontinue to add rules as you need them. Select ‘On small circles’ from the drop-down list.Īs below, we’ve set the feed rate to drop to 80% when cutting out circles that are smaller than 30mm in diameter.Ĭlick ok. In this instance, we’re going to slow down the movement when the machine in cutting out small circles. You can add a ruleset from the operation screen:Ĭlick the drop-down box at the top of the window and select ‘Add new rule set’ Cutting rules in SheetCAM are a powerful way to fine-tune your cutting results.
0 kommentar(er)
